semi-automatic pp bundling machine
Area of application
This is a full-automatic strapping machine used for strapping products using a polypropylene (PP) strap (straps for machines) for stabilizing purposes. The products to be strapped are limited within the arch, whose inner specifications can be customized according to customer requirements (standard specifications: W650mm × H500mm). Be careful for rigidity of working materials, and don't try to strap wet, ashy, powder or too-heavy (usually max. load 80kg) packages.
This machine was designed for strapping only. We strongly recommend that this machine not be modified and/or used for any application other than for which it was designed. Pay attention to the load-bearing capacity described in the manual. Do not use the machine until you have known all items.
This equipment is not suitable for explosive environments. It shall be specially customized if it is will be used in explosive atmospheres.
If it is used for the strapping of food or medicine products, it is recommended to use a specially customized stainless steel machine, which should be also cleaned and disinfected with disinfectants in accordance with industry regulations.
If it is used for the strapping of corrosive goods (such as seafood, etc.), pay attention to rust protection, and do not let a corrosive liquid enter the strapping head. In case that it goes into the strapping head, it should be dried immediately to prevent the strapping head from rusting, which will result in motor overload.
In case of objects or liquids spill, scattering on the ground around the machine, immediately remove these spills to avoid the risk of personnel slipping.
We recommend using the following PP strap | Raw material: | PP |
| Specifications: | Width: 5mm-9mm Thickness: 0.5mm -0.8mm |
| Strap coil width: | 170mm-190mm |
| Strap coil core inner diameter: | 200mm-210mm |
| Strap coil core outer diameter | 400mm-450mm |
| Maximum tension force | 45kg |
Specifications
| Size **: | L1170 mm×W585 mm×H1450 mm |
| Package size **: | L1300 mm×W700 mm×H1600 mm |
| Worktable height: | 850 mm |
| Bearing capacity | 80 kg |
| Net weight **: | 185 kg |
| Strap width: | 5mm-9 mm |
| Strap coil: | Coil core inner diameter 200 mm-210 mm Outside diameter 400 mm-450 mm Width (face) 170mm -190 mm |
| Strapping speed **: | 50 beats/min. |
| Strapping specifications: | Min. package size: W 80 mm × H 60 mm; Max. package size: Within the arch size |
| Adhesion technique: | Hot melting |
| Adhesion type: | Bottom adhesion, adhesion surface≥90%, adhesion positional deviation≤2 mm |
| Tension force: | 0-45 kg |
| Power: | 600W , 4 A |
| Power supply | 1P, 220V, 50Hz (Refer to the nameplate) |
| Noise emission: | ≤75 dB(A) |
| Adjustable items: | Arch size, and strap width |
| Notes: | ** Standard arch size: W 650 mm× H 500 mm, other sizes customizable * Subject to change without further notice |
Customer visit:
Delivery picture:
Welcome to visit us, we'd glad to be good friends with you!
I'm Sara
18202603137
