CZXY-2600 full automatic folding gluing machine

(1) According to the width of the cardboard and the softness and hardness of the cardboard, the inclination of the cardboard should not be too large, otherwise the paper feeding effect will be affected.

(2) According to the length of the cardboard, it should not be too tight, resulting in deformation of the cardboard.

(3) In addition to the balance of the left and right position of the cardboard, the bottom height should be greater than the cardboard height of 0.5-1.5mm.

(4) According to the operation of the belt, if there is a paper feed deviation, the adjustment bolts on both sides can be properly adjusted. In addition, the tension of several belts should be kept the same and should not be too large. The company does not count the loss. According to the size of the cardboard, the excess or unsuitable vacuum suction holes under the belt are blocked or blocked with iron plates.

01. The conveyor belt adopts a German imported circular seamless, high friction belt to ensure accurate and error free transportation of cardboard.

02. Adopting high-end linear guide rails and linear bearings, this machine is easy to operate, has lower errors, and is durable. As long as lubrication is in place, there are basically no faults.

03. The folding part is equipped with a cardboard pressure line correction device. The unique secondary pressure line sorting function plays an important role, which can be adjusted in all directions, allowing the creasing line to be sorted again when folding the cardboard. It is simple and efficient, completely eliminating the occurrence of "scissor mouth" phenomenon, and is suitable for cardboard with different rib thicknesses.

01. The unique correction part of this machine is equipped with a unique and state-of-the-art coaxial asynchronous device, allowing each to do their best and correct the deviation well. Adopting a dual speed correction device, the cardboard box is completely free of scissor edges (no scissor edge phenomenon), formed well, and the size of the edges is well controlled, with a positive and negative error controlled within 3 millimeters.

02. Adopting PLC programmable controller and touch screen, digital control. Quick and accurate response, simple operation.

03. Counting and ejection are carried out using pneumatic methods, which are reliable, accurate, and fast in action.

04. The compression output section adopts a slow stop conveyor device, which can accommodate more than 200 cardboard boxes, allowing them to be in a compression state for a long time. It not only ensures the required adhesive strength of the cardboard box, but also effectively improves the compressive strength of the cardboard box, making the appearance of the cardboard box more beautiful.