+86 15822346446 
CZXY-1428 Full-automatic 4-color printing slotting die cutting machine
description1
CZXY-1428 full-automatic four-color printing slotting die cutting machine | ||
Type | unit | 1400X2800 |
Maximum mechanical speed | pcs／min | 200 |
Economic speed（pc/min） | pcs／min | 180 |
Max paper feeding size | mm | 1400×2800 |
Max printing size | mm | 1400×2600 |
Minimum feeding Size（mm） | mm | 350×500 |
| To adapt to the thickness of the cardboard | mm | 2－11 |
Printing accuracy | mm | +/-0.5 |
Main motor power | kw | 22 |
Total unit power | kw | 75 |
Feeding Unit
1. Adopting a leading edge paper feeding mechanism, it has the characteristics of fast response speed, high positioning accuracy, good system stability, and long service life.
2. The side panel is electrically adjustable (using PLC touch screen and electric digital adjustment)
3. Pneumatic leveling device ensures more accurate lateral positioning of cardboard, avoiding waste. (computer-controlled timing)
4. Machine clutch:
The electric control machine is equipped with an alarm bell for clutch and continuous ringing during operation to ensure the safety of operators.
Pneumatic interlocking device, securely locked, convenient and accurate.
The main motor adopts a variable frequency motor and a variable frequency controller, which is energy-saving and starts smoothly. It is equipped with a motor start protection device.
Printing Unit
1. All printing rollers undergo computerized dynamic balancing correction to eliminate internal stress.
2. The printing phase and axial adjustment are both controlled by PLC touch screen and electrically digital 360 ° adjustment.
3. Loading and unloading printing plates are simple and easy to operate.
4. Circulating pneumatic ink feeding, equipped with ink shortage alarm device,
5. Printing roller: Steel pipe surface grinding, hard chromium plating. Mark reference lines in the horizontal and circumferential directions of the roller body for easy plate alignment. Perform computer dynamic balance correction and ensure smooth operation.Clutch type plate rolling shaft.Full version hanging plate slot, suitable for 9mm-10mm hanging plate strips.
Slotting Unit
1. The wire pressing wheel adopts French Martin technology, which uses hard to press soft, straight and non explosive wire.
2. The upper pressure roller is wrapped in polyurethane and will not damage the cardboard.
3. The horizontal movement of the slotting knife holder and the wire pressing wheel adopts synchronous electric adjustment, which ensures smooth movement and high accuracy. PLC touch screen adjustment, direct input of carton size, automatic adjustment, memory storage of orders and other functions.
Die Cutting Unit
Horizontal movement and repair device:
1) Mechanical horizontal 40mm, mobile device, automatic compensation of linear speed for die-cutting uniform weighing machine, which can make die-cutting rubber pads wear evenly and extend their service life.
2) The repair adopts an electric repair device to improve the reuse rate of the rubber pad, which can be repaired 3-4 times.
3) The pneumatic automatic separation device of the die-cutting roller reduces the wear of the rubber pad, thereby improving its service life.
